Publicité
Les langues disponibles
Les langues disponibles
Preventing material damage
Preventing material dam-
age
Preventing material damage
ATTENTION!
¡ Using the base, runners or appli-
ance doors as a seat surface or
climbing surface may damage the
appliance.
Do not stand or support yourself
▶
on the base, runners or doors.
¡ Contamination with oil or fat may
cause plastic parts and door seals
to become porous.
Keep plastic parts and door
▶
seals free of oil and grease.
¡ Metal or metal-style parts in the ap-
pliance may contain aluminium.
Aluminium reacts when it comes
into contact with acidic foods.
Do not store unpackaged food
▶
in the appliance.
Environmental protection and saving energy
Environmental protection
and saving energy
Environmental protection and saving energy
Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
Sort the individual components by
▶
type and dispose of them separ-
ately.
Saving energy
If you follow these instructions, your
appliance will use less power.
Selecting the installation location
¡ Keep the appliance out of direct
sunlight.
Preventing material damage en
¡ Install the appliance as far away as
possible from heating elements,
cookers and other heat sources:
– Maintain a 30 mm clearance to
electric or gas cookers.
– Maintain a 300 mm clearance to
oil or solid-fuel cookers.
¡ Use a niche depth of 560 mm.
¡ Never cover or block the exterior
ventilation grilles.
Saving energy during use
Note: The arrangement of the fittings
does not affect the energy consump-
tion of the appliance.
¡ Open the appliance only briefly
and then close it carefully.
¡ Never cover or block the interior
ventilation openings or the exterior
ventilation grilles.
¡ Transport purchased food in a
cool bag and place in the appli-
ance quickly.
¡ Allow warm food and drinks to
cool down before storing them.
¡ Thaw frozen food in the refrigerator
compartment to utilise the low tem-
perature of the food.
¡ Always leave some space between
the food and to the back panel.
Installation and connection
Installation and connec-
tion
Installation and connection
Scope of delivery
After unpacking all parts, check for
any transport damage and for com-
pleteness of delivery.
If you have any complaints, contact
your dealer or our "after-sales ser-
vice" → Page 37.
The delivery consists of the following:
¡ Built-in appliance
27
Publicité
