Publicité
Les langues disponibles
Les langues disponibles
4.
CLEANING AND MAINTENANCE
Cleaning is the only maintenance activity
that is generally required.
WARNING!
The warming drawer must be
disconnected from the power supply
before cleaning. Unplug the device from
the socket or isolate its power supply
circuit.
Do not use harsh or abrasive cleaning
products, scouring pads/sponges or
sharp objects, since this could cause
stains or scratches.
Never use high pressure or steam jet
cleaning appliances.
4.1
Appliance front and
control panel
The warming drawer can be cleaned
using just a damp cloth. If it is very dirty,
add few drops of washing-up liquid to the
water.
Wipe the surfaces dry using a dry cloth.
For
stainless-steel
drawers, special products for stainless-
steel surfaces can be used.
These products prevent the build-up of
dirt on such surfaces. Apply a thin layer
of this product on the surface using a soft
cloth.
On aluminium fronted warming drawers,
use a delicate glass cleaning product and
a soft, lint-free cloth. Wipe horizontally
without applying.
4.2
Interior of the warming
drawer
Clean the interior of the warming drawer
regularly using a damp cloth. If it is very
dirty, add few drops of washing-up liquid
to the water.
fronted
warming
Wipe the surfaces dry using a dry cloth.
Avoid water entering the air circulation
opening.
Only use the warming drawer again when
it is completely dry.
Non-slip base
The non-slip surface mat can be removed
to facilitate cleaning of the drawer.
The mat can be cleaned by hand using
hot water with a few drops of washing-up
liquid. Dry thoroughly.
The non-slip mat should only be replaced
when it is completely dry.
ENGLISH
11
Publicité
