Effect Section - JB Systems PMD 8 Mode D'emploi

D. EFFECT SECTION
1/2. LEFT AND RIGHT AUX EFFECT RETURN
These are to be connected with other external processor.
3. TALKBACK MIC INPUT JACK
XLR connector for DJ microphone.
PIN 1=Ground = shield
PIN 2=Hot = signal+ input
PIN 3=Cold = signal- input
4. TALKBACK LEVEL CONTROL
Controls the input level of the talkback.
5. TALKBACK SIGNAL DISTRIBUTION CONTROL
When you want the signal to be distributed to the auxiliary channel, press
AUX.
When you want the signal to be distributed to the effect channel, press EFF.
When you want the signal to be distributed to the L/R channel, press L-R.
6. PHANTOM POWER SWITCH
Control unit that supplies all the microphone inputs with 48V Phantom power.
7. LEFT MASTER LEVEL CONTROL
You can control the aux return level by adjusting the switch.
8. RIGHT MASTER LEVEL CONTROL
You can control the aux return level by adjusting the switch.
9. INPUT LEVEL CONTROL
Controls the input level of the digital chamber.
10. PAN CONTROL
Balance 'left/right' for external or internal echo.
11. CHANNEL SWITCH CONTROL
Adds or removes the echo effect.
12. PFL SWITCH
If you push this switch, you can monitor the effect only in your headphones.
13. EFFECT FADER CONTROL
Controls the output level of internal and external effect.
PMD8 – PMD12 5