Makita DGA514RTJU Manuel D'instructions page 8

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Rated voltage
Net weight
Electric brake
Wireless activation function
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Rated voltage
Net weight
Electric brake
Wireless activation function
Model:
Wheel diameter
Max. wheel thickness
Spindle thread
Rated speed (n)
Overall length
Rated voltage
Net weight
Electric brake
Wireless activation function
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
Only use the battery cartridges listed above. Use of any other battery cartridges may cause
WARNING:
injury and/or fire.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
DGA411 DGA412
-
-
DGA461 DGA462
M14 or 5/8" (country specific)
-
-
DGA511 DGA512
M14 or 5/8" (country specific)
2.3 - 3.0 kg
-
-
8 ENGLISH
DGA413
100 mm (4")
6.4 mm
M10
-1
8,500 min
382 mm
D.C. 18 V
2.2 - 2.8 kg
-
DGA463
115 mm (4-1/2")
7.2 mm
-1
8,500 min
382 mm
D.C. 18 V
2.3 - 3.0 kg
-
DGA513
125 mm (5")
7.2 mm
-1
8,500 min
382 mm
D.C. 18 V
2.4 - 3.0 kg
-
DGA414
DGA464
DGA514