Parkside Performance PSSAP 20 Li C4 Instructions D'utilisation Et Consignes De Sécurité page 32

The following warnings are used in the instruction manual, short manual, on the packaging and on
Read the instruction manual.
Follow the warnings and safety notes!
Use in dry indoor rooms only.
Wear protective gloves!
Wear hearing protection!
Wear eye protection!
CE mark indicates conformity with
relevant EU directives applicable
for this product.
Safety information
Instructions for use
CORDLESS SABRE SAW 20V
˜ Introduction
We congratulate you on the purchase of your
new product. You have chosen a high quality
product. The instructions for use are part of the
product. They contain important information
concerning safety, use and disposal. Before using
the product, please familiarise yourself with all
of the safety information and instructions for use.
Only use the product as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.
Warnings and symbols used
the rating label:
Switch the product off and remove
the battery pack before replacing
attachments, cleaning and when not
in use.
Protect the battery pack against heat
and continuous intense sunlight.
Protect the battery pack against water
and moisture.
Protect the battery pack from fire.
Protection class II (double insulation)
Alternating current/voltage
Direct current/voltage
Fuse
T3.15A
˜ Intended use
This cordless sabre saw (hereinafter "product" or
"power tool") is designed for light and medium
sawing through wood, chip board, plastic, metal,
and plaster board.
The product is not intended to handle heavy
sawing work, such as in stones or in workpieces
exceeding the maximum cutting capacity
(see "Technical data").
Always use the correct saw blades according
to the intended use! Observe the technical
requirements of this product (see "Technical
data") when purchasing and using saw blades!
GB/IE 31