Publicité
Les langues disponibles
Les langues disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of Delivery (fig. A)
1 x main frame (1)
1 x footrest frame (2)
1 x sunroof (3)
2 x wheels (4)
2 x rod (5)
2 x screw long (6)
2 x screw short (7)
2 x washer (8)
2 x cap nut (9)
2 x pin (10)
1 x spanner (11)
1 x assembly instructions
Technical Details
Weight: approx. 4.35kg
Dimensions: approx. 147 x 67 x 58cm
(L x W x H)
Max. load: 110kg
110
Max. loading capacity when used as a transport
aid: 20kg
Date of manufacture (month/year):
02/2020
Intended Use
The article is not designed for commercial use.
The article is intended for use in the leisure and
camping sector (outdoor area).
Safety Notice
WARNING!
• Danger of suffocation for children!
• Never allow children to play with packaging
materials when unsupervised.
Danger of Injury!
• Do not place loads that exceed 110kg on the article.
• Check the article before initial use for damage
or signs of wear and tear. Make sure that all
connecting elements are sufficiently tightened.
The article may only be used when in perfect
condition!
• Tighten each individual screw before using the
article.
• Place the article only on solid, even ground.
• Risk of injury if article is incorrectly assembled!
Danger of Bruised Fingers!
• The article may only be erected by adults.
Take care not to trap your fingers when fold-
ing and unfolding the article.
Caution!
• Always supervise your children. The article is
not a toy or a climbing aid. Make sure that
nobody stands on the head or foot sections of
the article.
• The article can also be used as a transport aid,
although it is not designed for transporting people!
• Secure the product in extreme weather condi-
tions, e.g. strong winds. Store the product in
protected rooms.
Assembly
Footrest frame assembly
Note: Keep the lounger folded while assem-
bling the footrest frame.
1. Remove the cable binders and the packaging
material.
2. Pull the inner rods (1b) out of the main frame (1a).
3. Insert the narrow ends of the inner rods into
the end of the footrest frame (2) until the holes
are directly above one another (fig. B).
4. Fix the inner rods and the footrest frame using
the screws (6) (fig. C).
5. Insert the footrest frame into the main frame
with the bracket facing downwards (fig. D).
6. Screw the cross bar (1c) to the footrest frame
(fig. E).
Note: Make sure that the bracket on the foot-
rest frame is facing downwards.
GB/IE
9
Publicité
