Publicité
Les langues disponibles
Les langues disponibles
POWER AMPLIFIER
¿AMOO
SPECIFICATIONS
Input jacks:
Output connectors:
Functions:
Rated output:
Input sensitivity:
Voltage gain:
Frequency response:
Power bandwidth:
Total harmonic distortion:
Intermodulation distortion:
Channel separation:
Signal to noise ratio:
Residual noise:
Slew rate:
Damping factor:
Input impedance:
Power requirement:
Power consumption:
Dimensions (W x H x D):
Weight:
Standard Accessory:
*
ООВ = 0.775 V rms
Pin jack x 1/ch, Phone jack x 1/ch
4P push terminals
POWER switch, OUTPUT LEVEL controls, Level meters,
CLIP indicators, MODE switch (5Т/МОМО)
50W + 50W (stereo, 1% THD, 8 Ohm)
100W (BTL mono, 1% THD, 16 Ohm)
-10 dB (245 mV), (1 kHz, 50W/8 Ohm, vol. max.)
38.2 dB (1 kHz, input-10 dB)
.
20 Hz — 20 kHz (0 + 0.5 dB)
10 Hz — 50 kHz (0.2% THD, 25W/8 Ohm)
0.0296 (1 kHz, 25W/8 Ohm, stereo)
0.2% (20 Hz — 20 kHz, 25W/8 Ohm, stereo)
0.2% (70 Hz : 7 kHz = 4 : 1, 25W/8 Ohm, stereo)
70 dB (1 kHz), 60 dB (20 Hz — 10 kHz)
105 dB (input shorted, IHF A)
-77 dB (vol. min., ІНЕ А)
10 V/usec. (full swing, 8 Ohm, stereo)
Grater 70 (1 kHz/8 Ohm), grater 60 (20 Hz — 20 kHz, 8
Ohm)
Grater 7.5 kOhm
U.S Model: AC 120 V.60 Hz
General Model: AC 220/240 V 50/60 Hz
U.S Model: 120 W
. General Model: 120 W
` 220 x 96 x 296 mm
(8-11/16" x 3-3/4" x 11-5/8")
4.6 kg (10 lbs. 2 oz)
Operation manual
* Specifications and. design are subject to change without notice,
Publicité
