Publicité
1. Turn the heater on by pressing the ON/OFF button on the rear of heater. Pressing button on the
control panel or by pressing the Power button on the supplied remote control. The flame effect will
illuminate at the highest setting " F8". Once power is off, heating element will stop working.
2. Power for heat- press the heat output button to cycle through the Low (1000W)/ High (2000W)/
OFF . The display showing "H1" for 1000W , " H2" for 2000W.
3. Flame Brightness -Adjust the brightness of the flame and turn off. Once the appliance is powered
ON, select one of the 8 flame brightness setting by pressing the flame brightness button to cycle
through the 8 settings. The display showing " F1" to " FB" .
4. Timer- Pressing the timer button to select and cycle through the timer options from 0.5hr to 8 hr.
The display showing "0.5" , "1.0" , "1.5" ...... "8.0"
US
If you have any questions, please contact our customer care center.
Our contact details are below:
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA
MADE IN CHINA
5
Publicité
