Environment; Characteristics Of The Appliance - Fondital eBLITZ VA Série Manuel D'installation, Utilisation Et Entretien

8. ENVIRONMENT

The symbol applied to the appliance and shown here indicates that the product
must be disposed of in separate collection for electrical equipment.
At the end of the life of the appliance, it cannot be eliminated as solid urban waste,
but it must be sent to the collection centre of your area or returned to the dealer
when buying a new appliance of the same type and destined to the same purpose.
Separate collection of electric and electronic equipment is part of a policy of
safeguarding, protection and improvement of the quality of the environment and
aims at avoiding potential adverse effects on human health due to the presence of
dangerous substances as per the classification of European directives.
Warning! Incorrect disposal of the appliance involves sanctions.
When the radiator is eliminated, respect standards and laws in force for oil disposal.

9. CHARACTERISTICS OF THE APPLIANCE

IP24: appliance protected against jets of water
Class II: double insulation
The radiator is composed of a body in die-cast aluminium alloy EN AB 46100 and contains a fluid
for internal heat transmission composed of highly refined mineral oil with high coefficient of heat
transmission, featuring high resistance to oxygenation to aid a long duration and low viscosity.
The internal fluid is heated through a resistor with class II insulation, resistor equipped with control
thermostat and safety thermal cut-off. Control and adjustment electronics ensure high accuracy in
ambient temperature setting.
N.B.: all the Fondital radiators are produced with an identification label that ensures traceability. Such
label certifies compliance with EEC directives and with electrical regulations.
Colour of the radiator: RAL 9010.
Input voltage
Resistor power
Insulation class
Water protection class
Working temperature
Storage temperature
Working relative humidity
Type of setting
Temperature setting
Temperature range
Temperature reading resolution
Max. amplitude
Max. drift
24
230V AC 50 Hz
Mod. VA3110
Mod. VA3115
Mod. VA3118
Mod. VA5807
Mod. VA5810
Mod. VA5812
Mod. VA5815
Mod. VA5818
Mod. VA5820
Class II
IP24
0 ÷ 50 °C
-20 ÷ 80 °C
0 ÷ 85 % without condensing
Integral proportion
Analogue setting with knob
7°C ; 15 ÷ 30°C
1/16 °C
0.5 °C
1.5 °C
EN
1000 W
1500 W
1800 W
700 W
1000 W
1200 W
1500 W
1800 W
2000 W