Télécharger Imprimer la page

all-clad SD800D51 Guide D'utilisation page 7

Publicité

Les langues disponibles

Les langues disponibles

Remove all packaging, stickers and various accessories on the inside and outside of the appliance.
Before using your multi-cooker for the first time, wipe the metal housing with a clean, damp cloth.
Wash the insert and glass lid in hot soapy water, then rinse and dry.
Plug in the multi-cooker. It is now ready for operation.
Never immerse the electric base in water.
Never leave uncooked food at room temperature in the multi-cooker. Store ingredients in containers in the fridge
beforehand.
Do not put the removable insert in the fridge.
IMPORTANT: Product housing can become very hot during cooking. Take care not to touch it without heat
protections, and keep children away from the product while in operation.
Always use oven gloves when removing the hot insert or the hot steam basket from the multi-cooker.
Take care not to block the air vents of the product during use. The product must be used on a flat and hard
surface.
During the initial use of this appliance, some slight smoke and/or odor may be detected. This is normal and will
stop after a few uses.
Never heat the insert when it is empty. Never preheat the base.
Do not immerse / wash the glass lid when it is still hot.
Never use the product for deep frying.
Take care to avoid possible oil splatter which can occur when adding food to hot oil.
B E F O R E F I R S T U S E
G E N E R A L U S A G E
EN
7

Publicité

loading