Use Of The Radiator; Important - Fondital Al-Advance GDSM0805 Manuel D'installation, Utilisation Et Entretien

Key lock function
It is possible to lock the device to avoid an improper or unintentional use, for instance for children
protection or in a public space.
To lock/release the keys press "Function" key and hold for about three seconds. In this way the
keyboard is locked/released.
Note: it is possible to switch on or off the radiator also with active key lock function, using "Standby key".
ASC adaptive control of start
This function, if activated, switches on the radiator in advance compared with the setting (maximum
advance of 2 hours) to ensure that the room can reach the desired temperature at the set time.
To activate/deactivate this function, see the previous paragraph "Window opening function".
When the function is activated, the corresponding symbol is displayed in the setting operating mode
(but it does not appear in standby mode).
Behaviour indicator
On the left side of the display a segment bar indicates the set temperature level. The higher
the set temperature, more segments are on. This is an immediate visualisation of consumption
required, since the higher the temperature set the higher, of course, the energy consumption.
Please note that a correct room temperature is between 20 and 21°C.
Temperature ranges associated with segments are:

4.3. USE OF THE RADIATOR

Press standby button to switch on/off the appliance.
Warning: when the appliance is in standby mode in is anyway powered.
When the device is in standby mode, time, day (number from 1 to 7) and standby icon are displayed.
It is possible to select the operating mode among those described above using "Function" key.
When the ambient temperature is lower than the set temperature, the radiator comes into operation
and starts heating up the rooms, and the
IMPORTANT: When the radiator is new, a particular smell could be detected, which indicates the
insulating coating of the heating element is drying. After a few hours of operation the smell will
disappear. If smell seems too strong, ventilate the room during the first few hours of operation of the
radiator.
During the first few hours of operation it is also suggested not to use the unit at full power, but select
a temperature close to room temperature, e.g. select 21°C if room is at 18°C.
30
Number of segments on
1
2
3
4
5
6
Temperature range in °
< = 19
19.5 - 20.5
21 - 22
22.5 - 23.5
24 - 25
25,5 - 32
icon is displayed.
EN
C