Costway FP10081US-SL Mode D'emploi page 11

2.Every ice making cycle finished,enter deicing process,the
flashes，the external pipe can add water to the water tank through the
electromagnetic valve,and the arrow on the
water reach the standard level, then the
enter the next ice making cycle；When the water can not reach the
standard level,the symbol is always bright, the unit stop working.After
water shortage,the unit needs to be restarted,otherwise it will start up
automatically after 15 minutes.
Note: Each ice making cycle is around 11-20minutes,the ice making time
will be changed according to the ambient temperature and the water
temperature change.Especially the first ice making cycle,the ice making
cycle will be longer because of the high water temperature in the water
tank,.But the ice making cycle will not be over 30minutes.
3.Adjust the ice thickness; Press the"+"、"－"button on the control panel to
adjust the ice thickness；The number in the bottom left of the display
window is the setting of the ice making time, default is "0", press "+" button
one time the ice making time will add one minute, the ice will be thicker；
Press " － " button one time the ice making time will reduce one minute, the
ice will be thinner. Restart the machine it will go back to default "0".
Note: The time currently set only changes the next and subsequent ice
making cycle.
4.When the symbol lights up，the machine stops working,it will work
again after you take out the ice.
5.Shut down the unit：When the unit is making ice，press
the"ON/OFF"button on the control panel，the unit shuts down and will be
into standby mode.If you press "ON/OFF" longer than 5S during ice making,
then the unit enters the deicing process directly, this function can help
remove the ice on the ice plate. Press "ON/OFF" to shut down the machine.
6.Timing setting：Setting range： 1-24 hours
Time shutdown：When the unit is running,it can set up the timing
shutdown.
Time on：When the unit is on standby,you can set the unit with ON-TIMER.
20
symbol
symbol will flash until the
symbol extinguishes，the unit
How to set up the timing
Press the TIMER button, the default timing time is"1H"in display window，then
press"+"button to adjust the timing time you need,every time you press the "+"
button,the time add 1 hour;Press"-"button can reduce the timing time.During
the process of time adjustment,The "H" in the lower corner of the number will
flash，then after 5 seconds flashing without pressing, the "H" letter will change
from flashing to always displaying, means the timer program has been
completed.
In standby condition display 5H,it means the unit will start automatically after 5
hours;In ice making condition display 5H,it means the machine will shut down
automatically after 5 hours, the "H" in the display screen indicates that the
machine currently has timing function, and the number in front will be smaller
and smaller. Until it becomes zero, the timing ends, and the machine enters the
mode you need.
How to cancel timing
When the unit has a timing（the display window will display XXH),press
"TIMER" button，the timing is canceled after the number on the screen and "H"
are extinguished.
When the unit has a timing,the display area in the lower left corner will display
the timing time and the ice making setting time, and the display content will be
switched every 5S.
7.Automatic self-cleaning program,The default cleaning time is 20
minutes.
Start the self-cleaning program: After connecting all of the water pipe, plug
on the main power supply plug, then press "TIMER CLEAN" button on control
panel for more than 5 seconds, to enter the self-Cleaning program , the
symbol rotate on display screens，time count down area display 20M. And
the "CLEAN " light will always be on during this period, the digit window will
indicate the left time, the water pump runs for 8 minutes and stops for 3
minutes, always recycle. The total duration time is 20 minutes for one
self-cleaning program. Also when the water pump stops, the water will supply
to the water tank automatically.
Cancel the self-cleaning program: It takes about 20 minutes to complete one
self-cleaning program. When the program is over, the system will be in off-state
automatically. And also you can press the "ON/OFF" button on control panel to
cancel the self-cleaning program by force.
8.How to switch Fahrenheit(°F) to Celsius(°c)?
Press +"or"-"button longer than 5s,It will automatically switch.
21