Samsung RF18A5101SG Mode D'emploi page 27

STEP 5 Align the fridge doors
A
FDR_RF5000A_DA68-04756D-00_EN.indd 27
• Before aligning the fridge doors, make
• You can use the adjustment parts (*) at
1. Fully open the freezer drawer (A), and
B
C
2. Insert the Allen wrench (C) into the shaft
D
3. Turn the Allen wrench (C) clockwise or
C
4. Use the Pliers (D) to insert the provided
D
E
F
G
Two 0.04" snap rings are provided with the
C
product.
sure the refrigerator is level. Refer to
the "Leveling the refrigerator" section
for detailed instruction.
the bottom of both fridge doors to raise
or lower the door.
then find the middle hinge (B).
(D) of the middle hinge.
counterclockwise to raise or lower the
door.
snap ring (E) in the gap between the
hinge-grommet (F) and the middle hinge
(G). The number of snap rings depends
on the gap.
NOTE
English 27
2024-04-04( ) 2:11:55