Télécharger Imprimer la page

EGO PRO X BAX1501 Traduction De La Notice D'origine page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Battery Capacity / Error
80% < Capacity≤ 100%
60% < Capacity≤ 80%
40% < Capacity≤ 60%
20% < Capacity≤ 40%
10% < Capacity≤ 20%
Flashing
≤10%
green
Under voltage (<2.7V) Flashing red Flashing red Flashing red Flashing red Flashing red
Over-temperature
Shining red Shining red
Battery
BATTERY PROTECTION
The battery circuitry protects the battery pack from extreme
temperature, over-discharge and over-charge. To protect
the battery from damage and prolong its life, the battery
pack circuitry will turn off the battery pack if it becomes
overloaded or if the temperature becomes too high or too
low during use. This may happen in extremely high torque,
binding, and stalling situations.
In the case of charging, the battery pack will shut
down with all 5 LEDs being switched off when its
temperature exceeds 60°C or below 0°C. Once the
temperature returns back to normal in 90 minutes, the
battery will return to work automatically. Otherwise,
the battery will shut down, reinsert the plug into the
charger again, can reactivate charging.
The battery pack will also shut down with all 5 LEDs
being switched off when the voltage of a battery cell
exceeds its protective voltage. It is recommended to
discharge the battery pack immediately. If this tip is
repeated many times, please contact with EGO service
centers.
In the case of discharging, when the temperature of
battery pack exceeds 70°C or below -20°C, the battery
DISCHARGING/UNUSED
LED's
1
2
3
On
On
On
On
On
On
On
On
On
On
On
Off
On
Off
Off
Off
Off
Shining red Shining red Shining red
pack will shut down with the 5 LED shining red for
10s after button-pressing. The battery pack will return
to work in both conditions when normal temperature
resumes and will allow the power tool to restart.
When the voltage of a battery cell is less than 2.7V, the
battery pack will shut down with the 5 LED blinking
red for 10s after button-pressing. It is recommended to
stop work and charge your battery pack immediately.
If this tip is repeated many times, contact your service
technician for assistant.
under any circumstances.
CHARGE THE BATTERY PACK
The battery pack is shipped partially charged. Before
using it for the first time the battery should be charged.
or expose it to wet or damp conditions. Water entering the
charger or battery pack will increase the risk of electric
shock. For any additional details, please refer to the
Operator's Manual for the EGO CHX5500E Charger.
56-VOLT BACKPACK BATTERY — BAX1500
4
5
5 LED lights on for
On
On
10 seconds after
button-pressing
4 LED lights on for
On
Off
10 seconds after
button-pressing
3 LED lights on for
Off
Off
10 seconds after
button-pressing
2 LED lights on for
Off
Off
10 seconds after
button-pressing
1 LED light on for
Off
Off
10 seconds after
button-pressing
1 LED light blinks
Off
Off
for 10 seconds after
button-pressing
5 red light blinks for
10 seconds after
button-pressing
5 red light on for
10 seconds after
button-pressing
WARNING:
You should never heat the battery pack
WARNING:
Do not charge the battery pack outdoors
EN
Remarks
7

Publicité

loading

Ce manuel est également adapté pour:

Pro x bax1500