Philips LIGHTOLIER C4L0510C Manuel D'installation

Calculite LED Surface Cylinder
Page 1 of 3
Surface Cylinder (Complete Unit)
C 4 L
Aperture
Product LED
Technology
4-1/2"
Calculite Remote
(114mm) Phosphor
Features
1. Mounting Plate: 18 ga. galvanized steel plate, suitable for mounting over
3"(76mm) or 4"(102mm) outlet box. Provided with a safety anchoring system.
2. Spring Holder: U-shape spring steel. Holds the luminaire by clip-in.
3. Electronic Driver: 120V or 277V 50/60 Hz.; overload and short circuit
portected; thermal regulation to protect against overheating; sound rating portected; thermal regulation to protect against overheating; sound rating
"A"; -20ºC (-4ºF).
4. PSU Housing: Cast aluminum.
5. Thermal Management: Proprietary heat sink design maintains junction
temperature for consistant, reliable performance and 50,000 hours at 70%
lumen maintenance.
6. LED Board Connector: Attaches to light engine via push-in
connector on LED board.
7. LED Board: Array of 16 high brightness royal blue LEDs 1000lm
or 8 for 500lm.
8. Optical Mixing Chamber: Remote phosphor technology
provides increased efficiency and color stability. Phosphor lens assembly
positioned in front of LED array converts blue light to white and produces a wide
even pattern of diffused light without bright spots created by individual LEDs.
Uniform phosphor coating provides consistent, stable color with a shift of no
more than +/- 100K over life. Mixing chamber redirects scattered light back out
through the emitting aperture.
9. Aperture Cone: Provides 50º visual cut-off to source and image.
10. Housing: Extruded aluminum.
11. Wall Plate Kit: Cast aluminum back and top plate, suitable for mounting over
3" (76mm) or 4" (102mm) outlet box with galvanized steel mounting plate.
12. Hanger: Holds aircraft cable.
13. Cord: 16/3 ST leads, 10 amps maximum. White color.
14. Glider: Steel chromed adjusting hardware for leveling.
15. Canopy: 5" (127mm) steel round decorative plate, no visible hardware.
16. Stem: 3/8" (9.5mm) dia. steel stem, 37" (940mm) long.
Finish
All painted finishes are baked powder or enamel.
Markings
cULus Listed, suitable for wet locations.
* cULus Listed, suitable for damp locations.
** cULus Classified, for dry locations only.
1
2
3
4
5
11
6
7
8
9
10
05 C
Lumen Family
Output
Cylinder
05 : 500lm
10 : 1000lm
Remote Phosphor LED, 5" (127mm) Cylinder
15
13
WALL MOUNT
W 30
Finish Température
A:
Aluminum 27: 2700ºK
W: 30: 3000ºK
White 35: 3500ºK
B: 40: 4000ºK
Black
Electrical
Lumen Input
Output Voltage Frequency
120V
500lm
277V
50/60Hz
120V
1000lm 1000lm
277V 277V
Options
Dimming- Capacity: See LED-DIM specification sheet.
Accessories
C4CW: Series Wall Bracket Mount Kit. Cast aluminum, suitable for
mounting over 3" (76mm) or 4" (102mm) outlet box. Galvinized steel mounting
mounting plate. White W, Black B or aluminum A finish.
C4CC *: Series 10ft (3048mm) Cable Suspended Kit. 5" (127mm) steel
round canopy and 4 5/8" (118mm) aluminum round cover, no visible hardware.
White power cord. Galvanized steel aircraft cable. Steel chromed adjusting
glider for leveling. White W, Black B or aluminum A finish.
C4CP *: Series 37" (940mm) long Stem kit. 5" (127mm) steel round
canopy and 4 5/8" (118mm) aluminum round cover. 3/8" (9.5mm) dia. steel
stem, no visible hardware. Can be cut to length on site, redo the 1/8-28
IPS thread. White W, Black B or aluminum A finish.
TM01 **: 10ft (3048mm) Track Mounting Kit. Adapter mounts to
Lightolier Lytespan track. Clear jacketed steel braided power cord.
Galvanized steel aircraft cable. Steel chromed adjusting glider for leveling.
Silver finish only.
C4L0510C
14
12
CABLE MOUNT STEM MOUNT
CCL 1
Reflector Voltage
Comfort
1 : 120V
Clear
2 : 277V
Input Input LED drive Input
Current Current Power ±5%
0.083 10W
0.036
350mA
0.167 20W
0.072 0.072
26-Sep-11
16
Power
Factor
THD
<5% >0.9
<10% >0.8
<5% >0.9
<10% <10% >0.8 >0.8