Publicité
Les langues disponibles
Les langues disponibles
Door Alignment
(see fig. # 3)
1. Remove hinge cover screw.
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a phillips head screwdriver.
4. Adjust the door or put a spacer in between and then tighten the screws.
5. Replace the top hinge cover.
Reversing the Door Swing
Note: Door reversal not available on stainless steel door models.
Left/right door opening method:
This product provides the reversing of the left/right door opening. You
can select your preference of door opening by following the procedure to
make the change.
Hinge box
cover
Top hinge
fig. # 3
English
8
Publicité
