DCO E-mini K5317 Manuel D'utilisation page 21

6. General settings
Password interface
6.1 Trip resetting interface
The trip resetting setting can choose whether or not to reset the single trip.
"n" indicates no resetting, "y" indicates resetting. The factory default is "n".
Press the [UP]/[DOWN] button to select "y" to clear the trip. After selecting "y", TRIP is displayed as
zero, indicating that the trip resetting is successful. Press the [MODE] button to enter the next settings
interface, press and hold the [MODE] button to save setting and back to the main interface.
Trip resetting interface
6.2 Backlight brightness setting
The backlight brightness setting can set parameters to 1, 2 or 3, to indicate backlight brightness.
1 indicates the darkest, 2 indicates the standard brightness, 3 indicates the brightest.
Press the [UP]/[DOWN] button to select backlight brightness level. The factory default setting is 1.
Press the [MODE] button to enter the next settings interface, press and hold the [MODE] button to save
setting and back to the main interface.
Backlight brightness setting
In the no speed state, press and hold the [UP] and [DOWN] button
for 2 seconds to enter the input password interface. When the
password is entered correctly, it can enter the general setting
interface (password is 9999). Press the [MODE] button to switch
different setting interface in the general setting.
21