9. Insert the plug to a power socket,
and turn on via the ON/OFF but-
ton. The display will read 60:00.
10. The device is set to a general 60
minute preparation cycle. Press the
TIME [+] or TIME [-] buttons to set
another preparation time. This can
be set in 1 minute increments from
60 to 1.
11. Now press the START/STOP
button. The appliance will begin the
freezing and mixing process.
12. If the ice cream is not yet solid after
the cycle, it can be left to freeze for
up to 60 minutes. If the mixture
freezes before the cycle ends, the
machine will stop and the ice cream
can be removed.
13. During use, the duration of the
cycle can be increase by pressing
the TIME [+] button to increase the
22
duration by 1 minute increments
between 60 and 1 minutes. Pressing
the TIME [-] button will reduce
length of the cycle.
14. The remaining time will be displayed
on the machine.
15. After the cycle is finished, the
appliance will automatically switch
off after a signal tone. This display
will read 0:00.
16. If the ice cream is not removed
within 10 minutes after the signal
tone, the automatic cooling functi-
on will remain on for a maximum of
60 minutes to prevent any melting.
Do not leave the ice cream in the
machine for any longer, as it may
become hard and splinter.