Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION AND CONNECTION
7. Place the supplied cover plate on the right-hand side. Remove the cover plate from the left-
hand side.
8. Remove the cover plate from the top-left corner of the door, disconnect the electrical
connection, and remove this part.
9. Remove the cover plate from the top-right corner of the door.
10. Place the left cover plate at the right, and place the right cover plate at the left.
11. Remove the screws and the middle hinge
12. Carefully lift the bottom door from the lower hinge and place it on a padded surface to
prevent scratching.
13. Unscrew parts 'S1' and 'S2' and attach 'S2' and 'S3' (included) to the other side with the
screws (see step 6).
EN 16
④
tapping screws which are used for
fixing the middle hinge part, then
②
④(
④
③
-
fl
e
①
screw
Publicité
