Publicité
Les langues disponibles
Les langues disponibles
Technical data
Cordless Jigsaw .... PSSPA 20-Li A1
Nominal input voltage U .............. 20 V
Idle speed n
......................0 - 3800 rpm
0
Saw stroke .................................. 26 mm
Cutting depth
in wood ......................... max. 135 mm
in non-ferrous metal .......... max. 20 mm
in steel (soft) ..................... max. 10 mm
Weight (without battery).... Approx. 1.5 kg
Sound pressure level
(L
) ................... 74,3 dB(A), K
pA
Sound power level
(L
) ................. 85,3 dB(A), K
WA
Vibration (a
) ....... 4,02 m/s
h
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with the
following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may be charged
with the following chargers:
PLG 20 A1, PLG 20 A3, PDSLG 20 A1.
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another power tool.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
= 3 dB
pA
= 3 dB
WA
2
;K= 1,5 m/s
2
Safety instructions
Ensure that the safety instructions are ob-
served when operating the trimmer.
Symbols and icons
Symbols on the trimmer:
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Carefully read these operating in-
structions.
Warning: hot surface
There is a danger of burns!
Dust blower function
Setting up pendulum
stroke
Electrical appliances must not be
disposed of with the domestic
waste.
GB
IE
23
Publicité
