Leviton 1450R Manuel D'installation

WARNINGS
• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF
BEFORE WIRING!
• TO AVOID PERSONAL INJURY OR DEATH, DO NOT USE THE MOUNTING SCREWS SUPPLIED IN THE WALLPLATE SCREW HOLE.
THE MOUNTING SCREWS SHOULD ONLY BE USED IN THE MOUNTING SCREW HOLES. PLEASE SEE DIAGRAM (BELOW).
• DO NOT use with single-gang wallboxes.
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• If you are not sure about any part of these instructions, consult an electrician.
NOTE: For use with #4, #6 or #8 AWG copper wire ONLY. May use #10 AWG solid copper wire for ground connection. DO NOT use with
copper-clad or aluminum wires on this device.
Installation instructions
• Strip wire exposing 11/16 inch (1.8 cm) of conductor.
Warning: Stripping wire too short may result in pinching insulation between screw and terminal.
Warning: It is important that conductors are not damaged during this process, if damaged cut off section and repeat step.
Caution: For replacement of existing device, it is recommended to cut off used portion of wire and strip new section.
• Identify and insert wires into appropriate terminals using wiring diagram.
• Tighten terminals screws to 75 in-lbs.
Warning: Wire must be torqued to 75 in-lbs., the torque MUST be maintained for a minimum of 5 seconds with a constant torque reading
of 75 in-lbs.
MUST repeat this step after all wires have been initially secured to 75 in-lbs.
Strip/Insert/Tighten to 75 in-lbs.
Dénuder/insérer/serrer à
un couple de 75 po-lb
(1.8 cm)
Pelar/Insertar/Apretar
a 75 pulg-lbs.
For installation instructions, visit www.leviton.com/instructions and search for 1450R.
Pour obtenir les instructions d'installation, rendez-vous sur www.leviton.com/instructions et cherchez 1450R.
Para obtener las instrucciones de instalación, visite www.leviton.com/instructions y busque el número de catálogo 1450R.
Recommended for use with plug-in EV chargers
Use herein of other third party trademarks, service marks, trade names, brand names and/or product names are for informational purposes only, are/may be
the trademarks of their respective owners; such use is not meant to imply affiliation, sponsorship, or endorsement.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should contact Leviton in writing at Leviton Manufacturing of Canada ULC to the attention of the
Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire (Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320.
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and
workmanship under normal and proper use for two years from the purchase date. Leviton's only obligation is to correct such defects by repair or replacement, at its option. For details
visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this
product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not
in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any
implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to two years.
Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits
or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
For Technical Assistance Call: 1-800-824-3005 (USA Only) or 1-800-405-5320 (Canada Only) www.leviton.com
50 Amp Heavy-Duty Flush Mount Outlet
Cat. No. 1450R - Ratings: 50A 125/250V AC/CA
Wiring Diagram
Schéma de câblage
11/16"
Diagrama de Cableado
250V
W
SYS GR
G
EQUIP
GR
14-50R
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
INSTALLATION
Install / Installer / Instalar
Use 2-gang wallplate (2.465" dia. opening) to complete installation.
Se servir d'une plaque pour deux dispositifs (ouverture d'un diamètre
de 2,465 po [6,261 cm]) pour terminer l'installation.
Utilizar una placa de pared de 2 módulos (apertura de 6.2611 cm
(2.465 pulg.) de diámetro para completar la instalación.
125V
125V
G
Y X
W
DI-000-1450R-20C-W
English