Airzone Aidoo Pro AZAI6WSPDA4 Guide Rapide page 5

Aidoo Pro Air To Water is connected to the AC unit by cable, with a connection process adapted
to the characteristics of each unit. The control and configuration of this device is carried out
via Bluetooth and Wi-Fi Dual (2.4/5 GHz) from the "Airzone Cloud" app (available for iOS and
Android). An external power supply is required to power your Aidoo Pro Air To Water device.
Note: for more information about our products, visit airzonecontrol.com.
DEVICE ELEMENTS
Port
RS-485 Connection to
indoor unit
* Note: both the shape of the terminal on the Aidoo Pro device and the shape of the cable may
vary depending on the compatible manufacturer.
RS-485 port
RS485 port for establishing
with the device.
Connection to the indoor unit
This terminal allows the device to communicate with the indoor air to water unit or the
thermostat via the connection cable.
Factory reset
*
Diagnostic
LEDs
Power Supply
Modbus communication
Reset of the
device
Relay
output
Digital
input
Power supply
input
Connection cable to
*
the indoor unit
EN
5