Publicité
Les langues disponibles
Les langues disponibles
1.Power On: Press
for 3 seconds to light up screen, then press
to power on heat pump.
2.Adjust Set Temperature: When screen is unlocked, press
or
to display or adjust the set temperature.
3.Smart/Silence mode selection:
① Smart mode as default will be activated when heat pump is on, and
screen shows
.
② Press
to enter Silence mode, and screen shows
.
(Smart mode: Unit will run from 20% to 100% / Silent mode: Unit will
run from 20% to 80%)
4.Defrosting
a. Auto Defrosting: When heat pump is defrosting,
will be
flashing. After defrosting,
will stop flashing.
b. Compulsory Defrosting: When heat pump is heating, press
and
together for 5 seconds to start compulsory defrosting, and
will be flashing. After defrosting,
will stop flashing.
(Note: Compulsory defrosting intervals should be more than 30 minutes
and the compressor should run for more than 10 minutes.)
12
Publicité
