Publicité
Les langues disponibles
Les langues disponibles
EN
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
FR
Avant de Commencer
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l'ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d'éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d'emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d'étouffement.
02
EN
INSTALL THE EXTERNAL
CONTROL BOX
1. Flip the external control box, open the blower outlet, attach the
Inflation Hose onto the air outlet at the front side of the Control
Base. Tighten it in place (see below).
2. Unscrew the cover on the air valve cover on the outer wall of the
spa and directly insert one end of the inflation hose.
3. Turn on the power, turn on the "BUBBLE" button and start
self-inflation.During the inflation process, help the hot tub unfold.
Wait about a few minutes.
4. Remove the inflation hose, and close the air valve cover.
Note: Simply using the inflation hose to self-inflate, the spa is not
very full. Continue to use the hand pump to inflate the spa.
5. After inflation is completed, remove the hose from the hand
pump, and close the air valve cover. Tighten it in place.
6. Install the 3 connecting tubes, and connect the 3 interfaces
between the Control Base and hot tub wall. Tighten the blower
outlet.
CONTROL PANEL (DISPLAY)
Once plugged into the power supply (GFCI on TEST/ON), the
control panel will light with a beep. Then the LED screen will read
the current water temperature in the spa.
03
Publicité
