BE AgriEase WCGR4H13 Manuel D'exploitation page 9

Install the Inserting piece (See Figure 3)
1. Insert the Inserting piece (B) into the slot of the safety switch box (A).
2. Fix the Inserting piece with the two M8x16 flange bolts (C) and two flange M8 nuts (D).
Install the Discharge chute (See Figure 4)
1. Install the discharge chute (A) with the
engine base by using M8x16 bolts (B) and
Spring washer (C) and Flat washer (D) to
tighten.
Install the Inserting piece (See Figure 5)
1. Insert the Inserting piece (B) into the slot of the switch box (A).
2. Fix the Inserting piece with the two flange M8 nuts (C).
B
C
D
Figure 3
Figure 4 D
C A
Figure 5
BE-WCGR4H13 USER MANUAL
A
A
BC
B
9