BE AgriEase WCGR4H13 Manuel D'exploitation page 10

Install the Handwheel (See Figure 6)
1. Assemble the handwheel (C) by using the spring washer (D) and flat washer (E), the splash guard (A) can
be adjusted at the desired direction, then tighten the handwheel.
Install the Battery Cord (Electric start version only, see Figure 7)
1. Open the battery box cover (A).
2. Connect the electric cord to the battery (B). Use the red cord to connect with positive pole (red color),
and the black cord to connect with negative pole (black or blue color).
3. Put back the cover on battery box (C), using M8X16 flange bolt (D) and M8 flange nut (E) to tighten
the box.
10
BE-WCGR4H13 USER MANUAL
C E D
Figure 6
D
E
Figure 7
A
A
B
C