BGS technic 8743 Mode D'emploi page 3

TOOLS
1 Secondary Sprocket Mounting Tool, to be used as OEM 116180
2 VANOS-Adjustment Tool, to be used as OEM 116150
3 Air Pressure Adaptor, to be used as OEM 113450
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool set is designed for setting the VANOS on BMW engines M52TU, M54 and M56.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com
SAFETY INFORMATION
● Do not use the tool if parts are missing or damaged.
● Use the tool for the intended purpose only.
● Never place the tool on the vehicle battery. There is a risk of a short circuit.
● Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
● Keep children and other unauthorized persons away from the work area.
● Be careful when working on hot engines because of the risk of burn injuries.
● If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
● This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
● After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
● Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Twin VANOS Adjusting Tool
for BMW M52TU / M54 / M56
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8743
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed