Publicité
Les langues disponibles
Les langues disponibles
Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
Components:
A. Body of Fountain (1x)
C. Back Cover (1x)
Assembly:
1. Place the body of Fountain (A) on a smooth, level surface .Put the top part of
fountain (B) on the body of fountain (A) .
2. 3. Turn the fountain back and slide the black cover (C) from left to right,
4. Pull the plastic tube from the back opening of the Fountain (A). Remove the
Submersible Pump (D) from its packaging and adjust the flow control to the lowest
setting to avoid splashing until the fountain is completely assembled and connect
the plastic tube to Pump (D).
5. Place the Pump (D) suction feet down into the bottom of the reservoir through the
opening at the back of the fountain and slide the back cover © from right to left.
6. Carefully fill with water. We recommend using distilled water to prevent scale
build-up.
7. Congratulations, your fountain is now complete. Plug the power cord for the
pump into your local power supply and enjoy!
B. Top of Fountain (1x)
D. Submersible Pump (1x)
4
Publicité
