Publicité
Les langues disponibles
Les langues disponibles
Folding and transporting the float tube
- Use a clean and dry surface.
- Deflate the float tube by carefully unscrewing the valves.
- Fold the left side of the float tube onto the seat, then the right side.
- Starting from the front point, fold the point downwards along the
length of the seat.
- Do the same for the end of the two floats.
- Place the float tube in the storage bag.
Storage
Once dry and clean, the float tube should be stored in a dry and
shaded place, not exposed to significant temperature variations.
The float tube can be stored in a folded position but if you have
enough space, you will extend its life by storing it flat and slightly
inflated.
C - Repair
In case of loss or breakage, you can contact our after- sales service:
Pressure loss
Temperature variations in the same day can cause pressure losses
or increases in your product.
4. TECHNICAL SPECIFICATIONS
This float tube is designed for fishing in calm waters for a short time
and over a short distance (Type I of ISO 6185).
The float tube is supplied in its transport bag. This allows the
transport of the pump and fins (not included). The bag contains:
- The float tube
- The deck base and its measuring gauge
- The lateral fishing rod holder
- 3 boxes (S/M/XL) for accessories storage
- the user guide + user manual
- the repair kit
08
The float tubes have several inner tubes, all equipped with low
pressure valves:
- 2 side chambers
- 1 seat base
- 1 seat backrest
Float tube name
Length
Width
Number of tubes
Dimensions of the product
when folded in its bag
Maximum pressure
Full float tube weight
Maximum load capacity
Maximum number of people
FT10002
150 cm (4' 11")
120 cm (3' 11")
4
75 x 44 x 10 cm (29.5" x 17"
x 4")
0.1 bar (1.5 Psi)
6 kg (13.22 lbs)
130 kg (286.6 lbs)
1
09
Publicité
