Publicité
Les langues disponibles
Les langues disponibles
Location of controls
1. Thermostat control knob (TEMPERATURE SETTING)- Adjust to maintain room
temperature.
2. Flame switch - Switches flame effect and power on/off.
3. Heating setting: please press "
4. Heating setting : please press "
operate without first press "
5. Flame dimmer control - Adjust to set flame intensity.
Four (4) legs
Twelve (12) screws
Tools required: Phillips Screwdriver (Not Included)
WARNING: Do not use this heater with missing, damaged, or broken legs.
Lay stove upside down on a padded surface to avoid scratches to the surface of your
stove.
Line up holes in the leg with holes in the underside of the stove body. With the use of the
screwdriver secure leg with the screws provided (3 screws per leg) as shown in the figure
below.
" for 750W.
" and "
" at the same time for 1500W (can not
").
4
Publicité
