Fanimation FP8003B Serie Mode D'emploi page 15

How to Assemble Your Light Kit Assembly or Cap (Continued)
6. For use with light kit (C).
Secure the glass to LED kit by twisting in a clockwise
direction. Twist the glass gradually
onto the LED kit.
NOTE: If you have installed your fan with the light kit,
skip as below Steps.
7. For use with steel cap (A).
Remove the LED assembly from LED kit by remove
the three screws. (Figure 7)
8. For use with steel cap (B).
Assemble the light wire cap to the light kit using the
provided screws and secure all four screws. (Figure 8)
9. For use with steel cap (C).
Assemble the steel cap to the light kit by twisting in a
clockwise direction. (Figure 9)
until it snaps
Do not over-tighten. (Figure 6)
LED Kit
LED Kit
LED Kit
Light Wire Cap
LED Kit
Steel Cap
15
Glass
Figure 6
LED
Assembly
Figure 7
Figure 8
Figure 9