Diamond G1/PMCA2 Instructions Pour Le Fonctionnement page 37

CleAnIng InSTRUCTIOnS
Cleaning for prolonged deactivation
When the appliance remains idle for a long time, perform all the described procedures
and apply the daily cleaning procedure.
When the operations are over, protect the parts more exposed to oxidation doing as
follows.
Therefore:
•
Use lukewarm water with a bit of soap to clean the parts;
•
Rinse the parts thoroughly, without using pressurised and/or direct water jets.
•
Dry the surfaces carefully using non-abrasive material.
•
Pass over all the stainless steel surfaces using a non-abrasive cloth slightly mois-
tened with Vaseline to create a protective coating.
For appliances with doors and rubber gaskets, leave the door slightly ajar to let it air
out and spread protective talcum powder on the rubber gasket surfaces.
Air out the appliances and rooms regularly.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 15 - 15