Mrcartool T80 Manuel D'utilisation page 4

Technical parameter
Power Supply
DC 12V
Test Oil Filling Volume
10-20ml
Product Structure
2.1 Structure diagram
1
2
3
4
5
Operations Instruction
3.1 Preparation before use
Install the hook onto the hook port [1] and hang under the hood.
Open the filling cap and drain 10ml of test liquid into the oil filling port [6].
NOTE：
If the test oil is overfilled, turn the device upside down to drain out part of the oil.
After completing the first two steps, start using the T80.
Rated Output Pressure
＜10psi
Rated Power
50W
6
7
8
9
2
Rated Output Flow
＜5L/min
[1] Hook port;
[2] Protection indicator;
[3] Smoke indicator;
[4] Power indicator;
[5] Smoke mode switch;
[6] Oil filling port;
[7] Oil level gauge;
[8] Smoke outlet;
[9] Power socket;