Mrcartool T80 Manuel D'utilisation page 3

Copyright Information
All rights reserved by SHENZHEN SHANGJIA AUTO REPAIR TOOLS CO., LTD. No part of
this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written permission of MRCARTOOL. The information contained herein is designed
only for the use of this unit. MRCARTOOL is not responsible for any use of this information
as applied to other units.
Product Introduction
1.1 Overview
T80 smoke leak detector is an entry-level automotive pipeline leak detection tool, which
can accurately detect various leaks in the automotive pipeline system, helping maintenance
technicians to quickly locate leaks and solve problems.
1.2 Working theory
Low oxygen combustion.
1.3 Way of working
The smoke leak detector employs a forced combustion smoke generation method in a low
oxygen environment. It is energized by a conductive column to the heating wire, which
rapidly heats up to more than 300°C so that the mineral oil reaches the ignition point and
enters the state of combustion. Due to the small intake of air flow, it is insufficient to provide
sufficient oxygen to maintain full combustion, thus the combustion mainly occurs on the
surface of the heating wire. Subject to high-temperature heating, the mineral oil retention
object can continue to burn insufficiently around the heating wire, thus producing a large
amount of smoke.
Features
Built-in Air Pump
Yes
Protection Indicator
Yes
Oil Drain Valve
None
Smoke Control Switch
Yes
Overheat Protection
Yes
Flow Meter
None
Liquid Level Gauge
Yes
Adjustable Pressure
None
1
Pressure Gauge
None
Flow Adjustment Knob
None
Air Control Switch
None
Intelligent Digital Display
None