Publicité
Les langues disponibles
Les langues disponibles
en-us_main.book.book Page 9 Wednesday, April 17, 2024 11:49 AM
way to the rear of the shelf under the
icemaker). Make sure that the icemaker
switch is set to O (off) position.
Icemaker
A
Ice bucket
B
Water Valve Installation
Tools Needed
• Flat blade and Phillips screwdrivers
Installing the Water Valve
CAUTION
• Unplug the refrigerator power cord from the
outlet before installing the water valve.
• It is important that you use the water valve that
came with this kit, even though your refrigerator
may already have one installed. The old valve will
not allow enough water through to properly fill
the icemaker and will cause damage.
1
Connect the water valve wire harness.
• Facing the back of the refrigerator, locate
the wiring harness for the water valve at the
bottom center. Plug the connector of the
water valve harness onto the refrigerator
terminals.
- housing water valve
locker
a
- housing refrigerator bottom
- direction of combined
locker
a
2
Assemble the valve cover
.
A
• Insert the bracket on the water valve
through the opening
INSTALLATION
9
over the bracket
k
B
in the valve cover.
C
Publicité
