Costway JB10010 Mode D'emploi page 5

Sixth：Set the Seat onto the top of Pump
Step 1. Locate the slot in the short column under the Seat. Align this
slot with the black pin at the top of pump.
Step 2. Set installed Seat & Backrest onto installed Pump & Base
and press down.
Please follow up the diagram beside
Operation the chair
First：
1. In the natural state, the upper part of the pump can rotate freely
on the rotation axis of the pump;
2. Elevate the foot bar and rotate the lock.
Hold up
08
Second：Raising the Chair
• Step down on the Foot Bar repeatedly to raise the chair to the
desired height.
• Do not over-extend the chair, creating the risk of falls or tipping the
chair and its occupant over, resulting in injury.
Third: Lowering the Chair
• Step down and hold the Foot Bar to allow chair to lower.
09