Uline H-7811 Instructions D'assemblage page 4

Base x 1
1. Align caster plate with bolt holes on base. Insert
four bolts through base into caster plate. Attach
bolts with lock washers and nuts. (See Figure 1)
2. Tighten nuts with 14 mm wrench.
3. Repeat for remaining casters.
NOTE: Before setting storage cabinet on
mobile base, Ensure all contents are removed
from cabinet.
1. Engage brakes on all four casters of mobile base.
2. Using two people, carefully lift cabinet onto mobile
base, making sure cabinet rests within outer lip of
base. (See Figure 16)
PAGE 4 OF 12
MOBILE BASE PARTS LIST
Caster with Brake x 4
MOBILE BASE ASSEMBLY
CABINET TO BASE ASSEMBLY
1-800-295-5510
uline.com
Bolt x 16 Lock Washer x 16
Figure 15
Figure 16
Nut x 16
0524 IH-7811