Publicité
Les langues disponibles
Les langues disponibles
48
BOX CONTENTS
This machine includes the following items which you will find inside the box:
-
1x Welder
-
1x Welding mask
-
1x Brush with ice pick
-
1x Ground cable
-
1x Torch
-
1x Instruction manual
•
Carefully remove the product and accessories from the box. Make sure all the items listed in the above list are
present.
•
Inspect the product carefully to make sure it has not suffered any breakage or damage during transport.
•
Do not discard packaging materials until you have thoroughly inspected the product and used it satisfactorily.
ATTENTION: If any parts are missing or damaged, contact the Authorised Service Centre. Do not
use this product without having replaced the missing or damaged parts. Using this product with
damaged or missing parts can cause serious injury to the operator.
USE OF THE PRODUCT
INSTALLATION
ENTRY CABLE CONNECTION
1.
The power cord located on the back of the welder is connected to a 220V AC power supply; make no
mistake in your connection.
2.
Connect the welder to ground with a cable which cross-section is not less than 2.5mm2 from the ground
screw located on the back of the welder to the ground connection of the junction box.
Electric power supply cable
Connection of the welder to ground
Connection to the material (ground)
TIG welding torch
Electrode holder
Gas supply hose
Publicité
