Abask ZD-X35 Manuel D'utilisation page 9

4. Getting Started
4.1 Installing the Dash Cam
1.Use the suction cup bracket to mount the dashboard on
the windshield, it is recommended to place it close to the
rearview mirror facing forward and adjust the angle of the
lens to get the best coverage.
2.Plug the supplied power adapter into the cigarette lighter
socket of your car, the indicator light is on to indicate that
the power is on.
3.Connect the power cord to the USB port on the
dashboard. Route the excess cable along the car's interior
trim as shown in the picture for a better look.
Rear dashcam installation instructions
4.Mount the waterproof rear camera on the windshield of
5