Hotpoint Ariston FK 61 X /HA S Mode D'emploi page 25

Setting the time
To adjust the time indicated by the pointers, briefly press the
knob 4 times until the CLOCK icon begins to flash.
Then, to increase or decrease the displayed time value in
steps of 1 minute, turn the knob clockwise or anticlockwise;
the minutes pointer moves clockwise or anticlockwise
accordingly, in steps of 1 minute.
Once 10 seconds have elapsed since the most recent
adjustment, the programmer automatically exits adjustment
mode.
Programming cooking
Programming a cooking duration with immediate start
Programming the cooking end time makes it possible
to begin cooking immediately and end automatically in
accordance with the programmed time.
To programme the cooking end time, briefly press the knob
twice until the END OF COOKING icon begins to flash.
To increase or decrease the cooking time in steps of
1 minute, turn the knob clockwise or anticlockwise;
the minutes pointer moves clockwise or anticlockwise
accordingly, in steps of 1 minute.
The END OF COOKING icon flashes continuously for 10
seconds after the most recent rotation. The programme can
be confirmed by pressing the knob or letting the 10 seconds
elapse, provided that a cooking time of at least 1 minute
has been programmed.
The END OF COOKING icon lights up to confirm
programming has taken place successfully.
Select the desired cooking mode using the SELECTOR
knob.
The oven switches on immediately and switches off at the
set end of cooking time.
To view the set programme, briefly press and release the
knob; the pointers and icons will display the set programme.
At the end of cooking, the END OF COOKING icon flashes
and the alarm sounds for 1 minute (to silence it, briefly
press the knob).
Turn the SELECTOR knob to the "0" position.
• For example: it is 9:00 and the cooking end time is set
to 10:15. The programme begins immediately and stops
automatically at 10:15, with a duration of 1 hour 15 minutes.
Programming a cooking duration with delayed start
Programming the cooking start time makes it possible to end
cooking automatically in accordance with the programmed
time.
To programme the cooking start time, briefly press the knob
once until the START OF COOKING icon begins to flash.
To increase or decrease the cooking start time in steps
of 1 minute, turn the knob clockwise or anticlockwise;
the minutes pointer moves clockwise or anticlockwise
accordingly, in steps of 1 minute.
The START OF COOKING icon flashes continuously for
10 seconds after the most recent rotation. If the knob
is not turned or pressed within this period, the pointers
automatically revert to displaying the time and the
programme is cancelled. After setting the cooking start
time (START OF COOKING icon lit steadily), pressing the
knob again will begin the cooking end time setting process
(the END OF COOKING icon begins to flash), as long as
at least one minute has been programmed; otherwise the
programming will be lost.
To programme the cooking end time, follow the above
instructions.
Select the desired cooking mode using the SELECTOR
knob. The oven will switch on at the set start time and will
switch off at the selected cooking end time.
• For example: it is 9:00, the cooking start time is set to
11:00 and the cooking end time is set to 12:15. The
programme begins automatically at 11:00 and stops at
12:15, with a duration of 1 hour 15 minutes.
! To cancel a programme, press and hold the knob
for 3 seconds: programming will be cancelled and the
programmer will revert to manual cooking mode.
The electronic programmer*
END OF
•• ••
COOKING icon
DURATION
icon
DECREASE TIME
button
Setting the clock
! The clock may be set when the oven is switched off or
when it is switched on, provided that a the end time of a
cooking cycle has not been programmed previously.
After the appliance has been connected to the mains, or
after a blackout, the icon and the four numerical digits
on the DISPLAY will begin to flash.
1. Press the button several times until the
the four digits on the display begin to flash.
2. Use the " " and " " buttons to adjust the time; if you
press and hold either button, the display will scroll through
the values more quickly, making it quicker and easier to set
the desired value.
3. Wait for 10 seconds or press the
finalise the setting.
Setting the timer
! This function does not interrupt cooking and does not affect
the oven; it is simply used to activate the buzzer when the
set amount of time has elapsed.
1. Press the button several times until the
the three digits on the display begin to flash.
*
Only available in certain models.
DISPLAY
CLOCK icon
TIMER icon
INCREASE TIME
button
SET TIME
button
icon and
button again to
icon and
25
GB