Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Troubleshooting
Symptom
General
No sound, sound interrupted or
static noise.
"Miswiring Check Wiring Reset
The Unit"/"Warning Check
Wiring Reset The Unit" appears
on the display and no operations
can be done.
The unit does not work at all.
Source cannot be selected.
The correct characters are not
displayed (e.g. album name).
FM/AM
SSM automatic presetting does
not work.
CD/USB/SD/iPod/iPhone
"Please Eject" appears on the
display.
"In Disc" appears on the display.
"Reading" keeps flashing on the
display.
Tracks/folders are not played
back in the order you have
intended.
The elapsed playing time is not
correct.
"No File" appears on the display.
"Not Support" appears on the
display and track skips.
"Cannot Play" flashes on the
display.
The unit cannot detect the
connected device.
The iPod/iPhone does not turn
on or does not work.
28
| ENGLISH
Check the cords, aerial and cable connections.
Check the condition of the disc, connected device and
recorded tracks.
Ensure to use the recommended stereo mini plug when
connecting to an external component. (
Ensure the terminals of the speaker leads are properly insulated
with tape before resetting the unit. (
If the message does not disappear, consult your JVC car audio
dealer or kits supplying company.
Reset the unit. (
page 3)
Check the <Source Select> setting. (
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
Store stations manually.
Press [ ], then insert the disc correctly.
The disc cannot be ejected properly. Make sure nothing is
blocking the loading slot.
A longer readout time is required. Do not use too many
hierarchical levels and folders.
Reload the disc or reattach the USB device/SD memory card.
The playback order is determined by the file name (USB/SD) or
the order in which files were recorded (disc).
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
Check whether the selected folder, the connected USB device/
SD memory card, or the iPod/iPhone contains a playable file.
Check whether the track is a playable file format.
Check whether the connected device is compatible with this
unit. (USB:
page 30) (SD:
(iPod/iPhone:
page 27)
Ensure that the device contains files in the supported
formats. (
page 26)
Reattach the device.
Check the connection between this unit and iPod/iPhone.
Detach and reset the iPod/iPhone using hard reset. For
details on resetting the iPod/iPhone, refer to the instruction
manual supplied with the iPod/iPhone.
Check whether <iPod Switch> setting is appropriate.
(
page 11)
Remedy/Cause
page 12)
page 3)
page 24)
page 10, 30)
Publicité
