Publicité
Les langues disponibles
Les langues disponibles
Is designed for automotive, truck, implement, fleet, and industrial repair shops where
Pressing , bending , straightening and forming, is required. Typical applications include
installation and removal of
Alternator and power steering pump bearings , axle bearings, transmission bearings, seals,
u-joints and others.the power unit on this press can't be equipped with a pressure gauge
Component
Capacity
Working Range
Stroke
Keep children and bystanders away while operating. distractions can cause you to lose control.
Keep work area clean and well lit. cluttered or dark areas invite accidents. personal safety.
Wear ANSI-approved safety goggles and heavy-duty work gloves during use and service.
Stay alert and use common sense when operating. do not use when tired or under the influence
of drugs, alcohol or medication.
Do not overreach. Keep proper footing and balance at all times.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards
Association (CSA) or American National Standards Institute (ANSI) when using the
shop press.
1. Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and
head protection. Always wear ANSI approved impact safety goggles, which must provide both
frontal and side protection. Protect your hands with suitable gloves. Wear a full face shield if
your work creates metal filings or wood chips. Protect your head from falling objects by
wearing a hard hat. Wear an ANSI approved dust mask or respirator when working around
metal, wood and chemical dusts and mists. Wear ANSI approved earplugs.
Intended Use:
Technical Specifications
Important Safety Information
⚠WARNING
Size
20T
3-5/32 to 42-1/2 in.
5-3/4in.
Publicité
