Publicité
Les langues disponibles
Les langues disponibles
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This machine is designed for flushing, refrigerant recovery, va-
cuum, oil injection, and refrigerant recharging in the vehicle's
air condition system. It is fully automatic. Once the configura-
tion parameters are set, the machine will do all the processes
without any need to pay attention to them.
It is suitable for R134a and R1234yf refrigerants and has a prin-
ter to certify the work that has been done.
Features:
•
Fully automatic
•
Easy to operate.
•
With a large-size inspection tube with LED backligh-
ting.
•
Vertically installed gauges that let the operator be
able to observe the pressure parameters even from
inside the car.
•
The high recycling rate of gas and oil.
•
With large-size LCD.
•
With a database and printer
•
The program and database can be updated.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before using
the product.
Failure to comply with these instructions could
result in personal injury and/or damage to the
product.
Please keep the instructions for future reference.
•
The machine is designed to be used and repaired by
qualified personnel only.
•
The machine is designed to be used for R134a or
R1234yf refrigerant. Please note that if you want to
change the refrigerant you need to use a different tank
and make sure that all the hoses are clean.
•
Fill the air condition (A/C) system with the quantity of
refrigerant recommended by the manufacturer.
•
Check the vehicle user manual to know which type of
refrigerant uses the vehicle.
•
Do not mix different type of refrigerant, otherwise it will
easily lead to malfunction of the machine.
•
Keep away from moving parts, rotating elements and
heating components.
•
Wear protective clothing gloves and goggles. The ope-
rator must be fully familiar with the vehicle's A/C system
and the operation of the machine.
•
Check whenever the engine is turned off that the igni-
tion key is turned to the full off position.
•
Do not expose the machine to direct sunlight or rain.
Use only in well-ventilated work areas.
•
Never exceed 30 ° tilt in transit.
•
Do not touch the high voltage power supply connec-
tion.
TECHNICAL SPECIFICATIONS
•
Type of refrigerant: R134A / R1234YF
•
Compressor power: 3/8 HP
•
Compressor capacity: 12,12cm3
•
Vacuum pump power: 180W
•
Coolant recover speed: 450g/min (GAS), 800g/min
(LIQUID)
•
Percentage of recovery: 99%
•
Coolant charge speed: >2 Kg/min
•
Vacuum pump capacity: 100l/min
•
Refrigerant tank capacity: 12L
•
New oil capacity: 280ml
•
Used oil capacity: 500ml
•
Working temperature: 10-500
•
Relative humidity: 085%
•
Maximum working pressure: 20 BAR
•
LCD display measurement: 240*128mm
•
High pressure manometer range: -1 ~ 35bar
•
Low pressure manometer range: -1 ~ 20bar
•
Power supply: 220V±10%, 50/60Hz
ASSEMBLY
•
Connect the red hose to the high-pressure port.
•
Connect the blue hose to the low-pressure port.
•
Insert the high-pressure gas adapter (red) to the red
hose.
•
Insert the low-pressure gas adapter (blue) to the blue
hose.
•
Locate in the vehicle the high-pressure valve of the
A/C system.
•
Connect to this valve the red hose.
•
Locate in the vehicle the low-pressure valve of the
A/C system.
•
Connect to this valve the blue hose.
OPERATION
1. Set the language: select one and press ENTER.
2. Set the refrigerant type: select one you will use and press
ENTER.
Warning: After confirming one type refrigerant, if you need to
replace another type of refrigerant, you must firstly discharge
the refrigerant from the equipment by recycling and evacua-
ting. Otherwise, another type of refrigerant cannot be used.
3. Set the units: select one and press ENTER.
· 8 ·
REF.54291
Publicité
