Publicité
Les langues disponibles
Les langues disponibles
Bluetooth connection unsuccessful,
monitor is abnormal, or strong
Bluetooth connection
electromagnetic interference is
unstable
present
No response when you Incorrect operation or strong
press button
electromagnetic interference
TROUBLESHOOTING
CARE AND MAINTENANCE
Resel iOS/Android device. Reset monitor by
pressing the START/STOP button and holding
for about 10 seconds. Make sure the monitor
and iOS/Android device are away from other
electrical equipment Please see
GENERALSAFETY AND PRECAUTIONS
Press the START/STOP button and hold for
about 10 seconds to reset the device.
1 If this monitor is stored near freezing temperatures, allow it to return to room temperature before use.
2. If the monitor is not used for a long time, please be sure to fully charge it every month.
3. No monitor component needs to be maintained by the user. The circuit diagrams, component
part lists, descriptions, calibration instructions, or other information which will assist the user's
appropriately qualified technical personnel to repair those parts of the equipment which are
designated for repair can be supplied.
4. Clean the monitor with a dry, soft cloth or a moistened and well wrung soft cloth using water,
diluted disinfectant alcohol, or diluted detergent.
5. The monitor can maintain the safety and performance characteristics for a minimum of
1 0,000measurements or three years of usage, and the cuff integrity is maintained after 1,000
open-close cycles.
6. The battery can maintain the performance characteristics for a minimum of 300 charge cycles.
7. It is recommended that if the cuff is used in a hospital or a clinic, it be disinfected twice a week.
Wipe the inner side (the side that contacts skin) of the cuff with a soft cloth lightly moistened
with Ethyl alcohol (75-90%). Then air-dry the cuff.
15
Publicité
