Publicité
Les langues disponibles
Les langues disponibles
3 Assembly instructions
Unpack your heater and find the wheel-
holding plate and butterfly nuts between
the fins assemblies.
1. Make sure the heater is unplugged and
in the "Off" position.
2. Turn the heater upside down.
3. Attach the wheel-holding plates onto
the heater as Fig.l shows. The U plate
is fixed between the last tow fins and
the other one is fixed under metal con-
trol box.
4. Fix the castors to the vertical axis of
both the wheel holding plates.
5. Insert the butterfly nuts and tighten
them securely.
6. Turn the heater upright
Your heater is now ready to use.
Fig.1
12 / EN
WARNING: Risk of fire. Do
not operate heater without
wheel assemblies attached.
Operate heater in upright
position only (wheels on
bottom, controls on top). Any
other position could create a
A
hazardous situation. Ensure
that the surface beneath
the heater is clean and free
of any obstructions. It is
not recommended that this
heater be placed on high-pile
carpeting or any other surface
that impedes the flow of air
underneath the heater.
Oil Filled Heater / User Manual
Publicité
