Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
Regardless of the previous flame setting, when powered off by the main power button,
the flames will come on in L4 mode (High) when you turn the heater on.
Log Glow Mode: To lock the flame function in the OFF position, with the flames in L4
mode, press and hold the flame button (5) for five seconds. The log lights flash several
times to indicate that the flame function is locked. In this mode, there are no flames but
only glowing logs. Pressing the flame button in sequence will set the logs for different
levels of log brightness. The log brightness levels are shown in the display (1). The log
settings are as follows:
Button Press
Flame Level
1st press
Flames Off
2nd press
Flames Off
3rd press
Flames Off
4th press
Flames Off
5th press
All Off
To unlock the flame function, press and hold the flame button (5) for five seconds. The
log lights flash several times and then both flame lights and log lights turn on.
1
USING THE MAIN POWER BUTTON
Press the power button (6) to turn the fireplace/heater unit on and off. Press the power
button (6) once to turn the unit on. Press again to turn the unit off.
HANOVER MEDIA FIREPLACE
50
Display Value
Fireplace Appearance
L4
Logs Glow Brightest
L3
Logs Glow Medium
L2
Logs Glow Low
L1
Logs Glow Brightest
None
Logs Off
5
6
Publicité
