Télécharger Imprimer la page

Canvas 064-4016-8 Instructions De Montage page 48

Masquer les pouces Voir aussi pour 064-4016-8:

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS
USING THE TIMER FUNCTION
The timer button (3) allows you to set the amount of time you want the fireplace/heater
to run.
The timer button (3) operates both the flames and the heater function. If the heater is
operating when the timer is set, then the heater is on the timer. If the flames are operating,
then the timer will control the flames. If both the heater and flames are operating when
the timer is set, then the timer controls both the flames and the heater.
Pressing the button in sequence will set the timer for a set interval. This interval period is
shown in the display (1), and the blue LED light turns on to show that the timer function
is engaged. The set intervals are displayed in this table. The timer starts after you select
your preferred interval and release the button; note that the display and blue light will
turn off after a few seconds. There is no clock function for turning the heater or flames
on or off at a specific time.
Button Press
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
1
USING THE HEATER CONTROL
Pressing the heater button (4) will turn on or off the heat and set the temperature in
the thermostat. If you turn off the heater using the main power button (6), the unit will
hold your preferred temperature setting in the memory. When the power is turned
back on, the heater will turn on at the same setting.There is no speed setting for the
heater blower.
To convert from Fahrenheit to Celsius: With the heater on, press and release the heater
button (4) so that the display (1) and LED function indicator (2) lights turn on (if they are
not already on). Then gently press and hold the main power button (6) for five seconds to
enter temperature converting mode. The LED indicator flashes five times in red color then
changes to green. Green indicates Celsius mode, and Red indicates Fahrenheit mode. In
this converting mode, the display (1) flashes. Repeat the same process to convert Celsius
temperature into Fahrenheit temperature.
HANOVER MEDIA FIREPLACE
48
Timer Interval
30 Minutes
1 hour
2 hour
3 hour
4 hour
5 hour
6 hour
OFF
3
Display
30
1h
2h
3h
4h
5h
6h
None

Publicité

loading