Installing The Power Supply; Installing Pci-E/Pci Card(S); Removing The Front And Top Panels; Installing The Front I/O Connectors - Corsair CRYSTAL Série Guide D'installation

CRYSTAL SERIES 570X

5. Installing the Power Supply

Install the PSU into the
lower chamber of the case,
and secure with four screws
from behind.

6. Installing PCI-E/PCI Card(s)

1. Remove thumbscrews and
400C_400Q STEP 5
corresponding slot covers.
2. Install the expansion
card and secure with
thumbscrews.
11
1
2

7. Removing the Front and Top Panels

Remove the thumb screws and
pull off the glass panel.

8. Installing the Front I/O Connectors

See your motherboard's manual for front panel header locations and pin-outs.
USB 3.0
POWER SW
HD AUDIO
HDD LED
POWER LED –
RESET SW
POWER LED +
12