Blomberg CTI 30410 Guide D'utilisation page 15

4 Use of the appliance
4.7.3Powermanagement:
The hole cooking hob is equipped with a maximum
of Power. When the Power function is activated,
and in order to exceed the maximum Booster, the
electronic system orders to reduce automatically
the power level of an other heating zone. The dis-
play is blinking on [ 9 ] during a few seconds and
then shows the maximum of power allowed:
Heating zone The other heating zone:
selected (example: Booster level 9)
[ P ] is displayed [ 9 ] goes to [ 6 ] or [ 8 ] depend-
ing the type of zone
4.8Timer
The timer is able to be used simultaneous with all
heating zones and this with different time settings
(from 0 to 999 minutes) for each heating zone.
4.8.1Settingandmodificationof
thecookingtime:
Action Control panel
Switch on Press cooking zone
cooking "On/Off" key
zone
Select the Slide on the "SLIDER"
power level
Select the Press simultaneously
Timer key [ - ] and [ + ] from
the timer until the
desired display is on
Decrease Press key [ - ] from the
the time timer
Increase Press key [ + ] from
the time the timer
After a few seconds, the [ min ] display stops with
blinking.
The time is confirmed and the timer starts.
Induction Hob / User Manual
4.8.2Tostopthecookingtime:
Action
Select the
Timer
Stop the
time
If several timers are activated, repeat the process.
4.8.3Eggtimerfunction:
Egg timer is an independent function. It stops as
soon as a heating zone starts up.
If the egg timer is on and the hob is switched off,
the timer continues until time runs out.
Action
Activate the
hob
Select the
Timer
Display
[ ON ]
Decrease
the time
Increase
[ 1 ] to [ P ]
the time
After a few seconds, the [ min ] display stops with
Timer
display on blinking.
The time is confirmed and the timer starts.
4.8.4Automaticstopattheend
[ 60 ] to 59,
ofthecookingtime:
58...
As soon as the selected cooking time is finished
Time
increase the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key
[ - ] and [ + ].
Control panel
Press simultaneously
key [ - ] and [ + ] from
the timer until the
desired display is on
Press key [ - ] from the
timer
Control panel
Press
[ main On/Off ] key
Press simultaneously
key [ - ] and [ + ] from
the timer
Press key [ - ] from the
timer
Press key [ + ] from
the timer
Display
Timer
display on
[ 000 ]
Display
[ 0 ]
[ 000 ]
[ 60 ] to 59,
58...
Time
increase
15 / EN