Publicité
ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 3/4" or Adjustable Wrenches
(1) Screwdriver
(1) Pliers
Spike points are sharp. Exercise caution when
handling and working near spike disks.
• Attach a hitch tube to the right hand side of the hopper
using two 5/16" x 2" hex bolts (17), 5/16" flat washers (35)
and 5/16" nylock hex nuts (27). Assemble the bolts and
washers from inside the hopper. Insert a tube plug (48).
Tighten. Repeat for the other side.
48
27
27
FIGURE 1
17
35
17
35
6
• On the right side, assemble the handle brace bracket
(5) to the lift handle (9) using a 5/16" x 3/4" hex bolt (32)
and 5/16" nylock nut (27). Tighten. See figure 2.
• Assemble the grip (45) onto the lift handle.
32
5
27
9
FIGURE 2
• Insert a 5/16" x 3-1/2" hex bolt (14) through the
transport tube (10), the lift handle (9), a spacer (42), and
through the hitch tube. Secure with a 5/16 nylock nut
(27).
• Insert a 5/16" x 2" hex bolt (17) through the transport
tube (10), two 5/16" flat washers (35), and the handle
brace bracket (5). Secure with a 5/16" nylock nut (27).
Tighten. See figure 3.
42
10
14
5
35
35
17
FIGURE 3
45
27
27
9
Publicité
